Posts filed under ‘Designs’

Hunger Games shawl update.

Big. Fat. UGH.

3 failed attempts to start the first design this afternoon. Roughly 2 hours spent knitting, ripping, knitting, ripping, knitting, ripping.

I’m having visualization and translation issues. I know what I want it to look like. I can sketch it out. But I can’t make it work in stitches.

I’m putting it on hold until tomorrow, my knit night, and maybe I’ll pick it back up and give it another shot.

We’ll see if this actually ever gets done.

Advertisements

January 24, 2012 at 5:27 pm Leave a comment

The girl who was on fire.

I’m a huge fan of The Hunger Games.

If you haven’t read this amazing book (and the rest in the series: Catching Fire, and Mockingjay) GET ON IT. IMMEDIATELY.

Recently, I’ve also been thinking about designing a shawl pattern. At my weekly knit group meeting, a friend suggested I design a Hunger Games shawl. I latched onto the idea immediately, and it’s been rolling around in my silly little head ever since.

This morning, though, it took on a new intensity. I spent a good 30 minutes sketching out two different designs for the shawl. One will be triangle-shaped, the other more a semi-circle, both with cables and a candle flame stitch pattern, to signify Katniss Everdeen, the girl who was on fire.

I made a Ravelry project page to gather my ideas into one place, because this is the current status of all my plans:

scattered out over little scraps of paper.

I need to start working on them right away, because I can’t get the ideas out of my head!

Also, for 2012, I made an unconscious resolution to post here at least once a month. SOMEONE HOLD ME TO THAT, PLEASE.

January 20, 2012 at 5:01 pm Leave a comment

Chutes and Ladders

OH, HEY, KNITTING BLOG.

LONG TIME, NO SEE. AMIRIGHT?

Okay. Anyway.

I have a new pattern! Just a simple cowl, knit in super luxurious Madelinetosh.

It’s called Chutes and Ladders, and it’s available as a free Ravelry download or as a PDF download from the Patterns page!

October 11, 2011 at 3:20 pm Leave a comment

Yarn, design, and poll!

So, we’re gonna ride right on past the part where I apologize for not blogging for 3 months, and get straight to the point.

This point comes in, like, 4 bullet points:

  • I recently bought 4 skeins of Malabrigo sock. (One is already spoken for – I bought it with a project in mind, so it is not eligible in this poll. I’ll post pictures of the eligible ones at the bottom.)
  • I WILL BE RESTARTING THE AZURES SOMETIME SOON.
  • I will not be using the Araucania Ranco I used before, even though I unraveled it all and it’s in 2 separate balls already. (I think it has a different destiny.)
  • I want to use one of the 3 eligible Malabrigo Sock skeins for the Azures.

The one skein that is spoken for is in Tiziano Red. Oh lordy, it is GORGEOUS. I’m going to use it to make another set of my Untitled Mitts.

The original pair were knit in KnitPicks Palette. There are some changes I need to make to the pattern, so I’m going to make another pair, and they’re going to be awesome.

So, on to the poll! The 3 skeins I have available are Turner, Stonechat, and Impressionist Sky.

Each colorway is gorgeous and would make an amazing pair of socks (and probably will someday) but I can’t decide!

Personally, I am leaning towards Turner. BUT. “Azure” means blue, so Impressionist Sky is a close second.

HERE COMES YOUR PART. Vote in this handy-dandy little poll for which colorway YOU think I should use. I can’t guarantee I’ll go with the results of the poll, but let’s just see what happens.

Tonight I started swatching for Magic Mirror Socks with Schoppel-Wolle Crazy Zauberball (both Ravelry links). Um, REALLY EXCITED about it.

And lastly, I designed the Firebending Hat. Pattern forthcoming.

April 23, 2010 at 9:22 pm Leave a comment

PATTERN: Earthbender Hat

EARTHBENDER HAT


Yarn: Cascade 220 – Forest Green (MC), Yellow (CC)
Needles: US 9 Circular (40″+ for Magic Loop)
Gauge: 4.5 sts/inch in stockinette stitch
Notions: 2-3 stitch markers, yarn needle

SOLID COIN:

CO 92 sts.
Join for Magic Loop, being careful not to twist.

Work 2×2 rib for 8 rounds (or 1 inch, whichever you prefer.)

K 1 round.

Switch to CC and knit until hat measures 4-5 inches from cast on.

Begin decreases as follows:
Setup: K23, Place Marker (PM), K23, PM, K23, PM, K23
Round 1: K2tog, *K to 2 before marker, SSK, slip marker, K2tog* 3 times, K to last 2, SSK
Round 2: Knit all sts.

Repeat these 2 rounds 4 times in CC.

Switch back to MC and continue decreasing until 9 sts remain between markers.

Next round: K2tog, *K to 2 before marker, SSK, slip marker, K2tog* 3 times, K to last 2, SSK
Repeat this round until 3 sts remain between markers.

Next round: *K2tog, K1* around

8 sts left. Thread yarn onto yarn needle and draw through remaining stitches, closing top of hat.

OUTLINED COIN:

Follow instructions for SOLID COIN for Cast On and ribbing.

K 1 round.

Switch to CC and K 3 rounds.

Switch back to MC and K until hat measures 4-5 inches from CO.

Begin decreases as follows:
Setup: K23, Place Marker (PM), K23, PM, K23, PM, K23
Round 1: K2tog, *K to 2 before marker, SSK, slip marker, K2tog* 3 times, K to last 2, SSK
Round 2: Knit all sts.

Knit decreases in MC for 4 rounds.

Switch to CC for 3 rounds.

Switch back to MC and continue decreasing to end. When 8 sts remain between markers, thread yarn through remaining stitches, closing top of hat.

Wear the version of your choice while practicing your Earthbending Skillz.

January 30, 2010 at 7:56 pm Leave a comment

Waterbender Hat PDF

BREAKING NEWS.

My friend Dani (who, in addition to being a great friend, is also an excellent designer, dyer, tea-blender, and sock-club-runner) has turned my Waterbender Hat pattern into a handy-dandy PDF file for your downloading enjoyment. (Also, go check of Dani’s blog and shop. Buy things from her, because she is awesome.)

You can download it from the Patterns Page! (I’m working on putting it on Ravelry, and it should be up sometime soon.)

Also, in design news: I’m working up 2 versions of the Earthbender Hat for a class in the HPKCHC. Those patterns will be posted (if not in PDF form, then definitely in a blog post) before the end of the month!

January 19, 2010 at 8:30 pm Leave a comment

PATTERN: Waterbender Hat

WATERBENDER HAT

IMG_6245(Download the PDF!)

Size: One size fits most adult heads

Yarn: 1 ball each of Wisdom Yarns Poems #558 (MC) and #517 (CC)

Needles: US9 Circular (I did Magic Loop on a 40” circular set, but you can use a shorter circular set and switch to DPNs for the crown)

Gauge: 4.5 stitches per inch (row gauge is not crucial)

CO 112

Join for working in the round. Work in 2×2 ribbing for 1 – 1.5 inches

K 1 row even, decreasing 2 stitches evenly. You should now have 110 stitches.

BEGIN CHART:

waterbending chart

After working the 8 rows of the chart, switch back to MC. Knit in MC for 4 – 5 inches (measure from bottom of ribbing.)

Begin decreasing.

1: *K9, k2tog* around

2 and all even-numbered rows: K around

3: *K8, k2tog* around

5: *K7, k2tog* around

7: *K6, k2tog* around

9: *K5, k2tog* around

11: *K4, k2tog* around

13: *K3, k2tog* around

15: *K2, k2tog* around

17: *K1, k2tog* around

19: K2tog around (You can repeat this row if you like.)

Cut yarn, leaving a generous tail, and thread yarn needle. Draw yarn through remaining stitches to close top of hat. Weave in ends.

Wear with pride when you’re practicing your Waterbending skillz.

January 18, 2010 at 4:52 pm Leave a comment

Older Posts


September 2019
S M T W T F S
« Feb    
1234567
891011121314
15161718192021
22232425262728
2930  

Archives